How to create Compliance Reports
Compliance reports gives us the summarized results of the policies.
Accessing Compliance Reports
Creating new report
Steps to create new report
Report name: Login Banner Report -> Report type: Policies -> Policy name: Login banner
Downloading report
Scrolling down the bottom, we see "Show Report"
This leads to pop-up window as shown below. Which can give us a downloadable report.
Selecting Detail level: None(if we don't need to see the details of the non-compliancy) -> Download
Related Articles
Compliance reports - Checking software version
In this article, we are creating a Compliance report for Cisco IOS nodes to check its software version is 15.2 or not. Steps involved are: Creating the policy Maping the Cisco_IOS nodes Creating Rule Creating the condition Creating Reports Creating ...CVE - How to create Compliance policies for Common Vulnerabilities and Exploits.
Below is an example about building compliance policies from the CVEs. We will be using CVE-2018-0282 for this case. Creating Policy (1) Compliance -> (2) Policies -> (3) New -> (4) Name: CVE-2018-0282 -> (4) Save Applying to all vendor Nodes Under ...How to create new policy
Policy creation overview Compliance policies are used for validating the device configuration and its state. Compliance Policies are accessible from main menu as below: Compliance -> Polcies There are 4 steps in creating a policy. Step 1: Name the ...Cisco IOS - How to create compliance policies
This article details all steps that you need to do in order to be able to run compliance on a single router. This is a process where you first model the router, add its configuration to Network Configuration and Change Management (NCCM), create a ...Compliance checks based on commands
About Command checks NetYCE compliance can be used to validate state of device by issuing show commands. Below is an example where we would be validating NTP status of a Cisco IOS device. Not working CLI output: CoreRouter#show ntp status Clock is ...